RE USE: Zipper Neck Reconstructed Shirt
Things you need:
1 oversized shirt
sewing machine
scissors
pins
5-7 inch zipper
1 oversized shirt
sewing machine
scissors
pins
5-7 inch zipper
Step 1:
What I did was I laid my
shirt flat on the floor and
eyeballed where I wanted
the zipper to go.
What I did was I laid my
shirt flat on the floor and
eyeballed where I wanted
the zipper to go.
Step 2:
Cut a slit slightly smaller
than the zipper itself and
install the zipper.
Cut a slit slightly smaller
than the zipper itself and
install the zipper.
Step 3:
You can do this step two ways. You can either eyeball the excess
and freehand cut it off. (only do if you know your size well.)
Or you can take a shirt that you know fits you well and use that
as a guideline for where to cut. (Double check the size around
your arms.) After cutting pin the sides down and sew. And you're
done! ^__^
You can do this step two ways. You can either eyeball the excess
and freehand cut it off. (only do if you know your size well.)
Or you can take a shirt that you know fits you well and use that
as a guideline for where to cut. (Double check the size around
your arms.) After cutting pin the sides down and sew. And you're
done! ^__^
| thea starr-domestic artist 2006 |
